Xi'An LIB Environmental Simulation Industry
Provide Test Chamber, Provide Test Solution
Add to Cart
Fast Change 220℃ Thermal Cycling Chamber
Description
Thermal cycling chamber is designed for testing the capability of heat-endurance, cold-endurance, dryness-endurance, and humidity-endurance, suitable for quality control of the industries of electron, electrical equipment, vehicle, metal, foodstuffs, chemistry, building materials, luggage, adhesion tape, printing, packaging, etc.
Products Parameters
| Name | Fast Change 220℃ Thermal Cycling Chamber | ||||
| Model | TS-340 | ||||
| Inner dimensions of test room (mm) | 450*450*360 | ||||
| Volume of test room (mm) | 72L | ||||
| Load of test room | 30kg | ||||
| Overall dimensions(mm) | 1710*1020*1845 | ||||
| Pre-heat room
| Upper limit preheat temperature | +220℃ | |||
|
| Heating time | Ambient temperature to ~ + 200℃, within in 30 minutes. | |||
|
Pre-cool room | Lower limit pre-cool temperature | -75℃ | |||
|
| Cooling time | Ambient temperature to ~ -70℃, within in 30 minutes | |||
| Test room | High temperature exposure range | Ambient temperature +20 to +200°C | |||
|
| Low temperature exposure range | –65 to -5°C | |||
| Recovery time | Within 15 minutes | ||||
| Temperature fluctuation | ≤±0.5℃ | ||||
| Temperature deviation | ≤±3 ℃ | ||||
| Controller | Programmable color LCD touch screen controller | ||||
| Cooling system | Mechanical compression refrigeration system | ||||
| Refrigerating unit | French TECUMSEH compressor | ||||
| Refrigerant | R404A, R23 | ||||
| Air circulation | Centrifugal wind fan | ||||
| Exterior material | Steel Plate with protective coating | ||||
| Interior material | SUS304 stainless steel | ||||
| Power Supply | 380V 50HZ | ||||
| Environmental conditional | 5℃～+40 ℃ ≤85% R | ||||
Design and Construction
|
| Safety Basket and Test Area |
Programmable Controller
| Thermal Chamber Equip Programmable Controller |
Thermal cycling chamber,Rectangular glass viewing window, with lighting to keep bright inside the chamber; using double-layer glass makes a clear observation for test items at any time; windows with anti-sweat heater device to prevent water from vapor condensation and water droplets, and high-brightness PL fluorescent lamp keeps the lighting inside the chamber.
Accessories
Thermal Cycling Chamber
Inner door with operation hole (optional)
50mm or100mm Entrance hole for test wire, Dia. 50mm or 100mm
Sample Shelves, two layers or more
Thermal test chamber equip R232 or R485 communication Interface