
Add to Cart
Description
ISO9227 Corrosion Test Salt Test Equipment with a certain volume space, the salt spray test device, using artificial methods in its volume space, causing the salt fog environment to evaluate the quality of the product's resistance to salt spray corrosion.
Name | ISO9227 Corrosion Test Salt Test Equipment |
Model | S-250 |
Internal dimensions | 640*1000*500(mm) |
Overall dimensions | 810*1800*1180(mm) |
Temperature range | Ambient ~60℃ |
Humidity range | 95% ~ 98% RH |
Temperature fluctuations | +/- 0.5 ℃ |
Temperature deviation: | +/- 2.0 ℃ |
Test time | 1~999 hours, settable |
Spray deposition | 1~2ml / 80cm2 · h |
Spray type | Continuous / Periodic |
Temperature Controller | LED display, P.I.D+S.S.R. microcomputer integrated controller |
Temperature sensor | PT100Ω / MV A-class |
Salt fog collected | Fog collector and fog measure cylinder |
salt water filtration | Salt water filter near the suction tubes( Avoid the nozzle blockage) |
Salt water preheating | Saturated air barrel |
Spraying system | Atomizer tower and Spray nozzles (Fog is more fine and uniform distribution) |
Interior /Exterior material | Glass fiber reinforced plastics |
Standard configuration | Sample bracket / sample holder / spray nozzle / Fog collectors / measure cylinder |
safety device | over-temperature protection, water shortage protection, over current protection, earth leakage protection |
Sealing | Hydrostatic hood seal |
Standard | ISO 3768/3769/3770, DIN50021-75, ASTM B-117, JIS H8502, IEC 68-2-11,IEC68-2-52, MIL-STD-750, ISO 9227 |
Power Supply | 220V 50HZ |
![]() | ![]() | ![]() |
Controller | Sample Hoder | Saturated Barrels |
Advantage
1. With a program-controlled control system, you can choose between continuous salt spray (ASTM standard) or periodic salt mist
2. The automatic/manual water system can automatically replenish the water level when the water level is insufficient, and the test is not interrupted.
3. Precision glass nozzle mist diffuses evenly and naturally falls on the test plate, ensuring no crystalline salt blockage.
Test Requirements
Equipment requirements: electronic salt spray instrument continuous non-stop spray capacity needs to reach at least 48h;
Results requirements: after the test visual inspection of the tested products, operation inspection should not have any faults or damage, can work properly.
![]() | ![]() |