Xi'An LIB Environmental Simulation Industry
Provide Test Chamber, Provide Test Solution
Add to Cart
Description
Temperature Humidity Controlled Chamber can realize both high and low temperature test.
It can continuously run for long time.
Controller display easy to understand and operate.
Equioment Types
●Temperature Only
●Temperature & Humidity
●Cascade Refrigeration System
Main Parameter
| Name | Temperature Humidity Controlled Chamber | ||
| Model | TH-100 | TH-1000 | |
| Internal Dimension (mm) | 400*500*500 | 1000*1000*1000 | |
| Overall Dimension (mm) | 860*1050*1620 | 1550*1550*2110 | |
| Interior Volume | 100L | 1000L | |
| Heat load | 1000W | ||
| Temperature Range | A : -20℃ ～ +150 ℃ B : -40℃ ～ +150 ℃ C: -70℃ ～ +150 ℃ | ||
| Temperature Fluctuation | ± 0.5 ℃ | ||
| Temperature Deviation | ± 2.0 ℃ | ||
| Humidity Range | 20% ~ 98% RH | ||
| Humidity Deviation | ± 2.5% RH | ||
| Cooling Rate | 1 ℃ / min | ||
| Heating Rate | 3 ℃ / min | ||
| Cooling system | Mechanical compression refrigeration system | ||
| Refrigerating unit | French TECUMSEH compressor | ||
| Refrigerant | R404A, R23 | ||
| Heating Element | Nichrome heater | ||
| Controller | Programmable color LCD touch screen controller | ||
| Ethernet connection, PC Link | |||
Main Details
 | |
| Adjustable Shelf
| Test Ports
|
| |
| Viewing Window LIB unique design virtually eliminates exterior window sweating during normal temperature cycling conditions. | Automatic Feed and Drain System
|
Accurate Humidity Measurement
●Reliable Vapor Generator
The heated vapor generator has no pump to fail or orifice to clog. The stainless-steel vapor generator assembly is protected against low-water and over-temperature conditions. The immersion heater has an embedded thermocouple for fast-responding thermal protection.
●Heated Viewing Widow
Eliminates fog and condensation without a manual wiper.
●Water Recirculation System
Water recirculation system provides a reliable source of demineralized water for the humidity system, using ordinary tap or pre-filtered water. Condensate from the chamber is returned back to the water tank. Perfect for installations where a water line and drain are not available.
Factory Acceptance Inspection
1. Whether the appearance of the product equipment is complete and the size meets the requirements
2. Inspect performance and parameter according to datasheet
3. Whether the accessories of the equipment parts are complete and complete
4. Conduct special testing and debugging of the entire equipment for different countries and regions.
Hot-Sale Products
| Small Temperature Chamber | Thermal Cycling Test Equipment |
| Salt Spray Corrosion Test Chamber | Xenon Arc Test Chamber |