Xi'An LIB Environmental Simulation Industry
Provide Test Chamber, Provide Test Solution
Add to Cart
1. Refrigeration principle and compressor: In order to meet the requirements of test chamber on temperature decrease rate and lowest temperature
2. Rotary working table: aluminum alloy table board (corrosion resistant)All parts contacting water are made of stainless steel or copper.
3. simulation performance:
The working room have wind channel inter layer on three walls, equipped with heater and humidifier, circulating fans and other device. On top of the test chamber there are balance exhaust holes to exhaust air in laboratory constantly to keep balance of air concentration in test chamber
Stainless Steel Ozone Aging Test Chamber,Rubber Ozone Aging Tester Can be used to test rubber products with static tensile deformation, such as vulcanized rubber, thermoplastic rubber, cable insulating bush; expose the test specimens to the sealed air in the test chamber without light and with constant ozone concentration and constant temperature according to predetermined time, and then observe the cracks on test specimens surface and the degree of change of other properties to evaluate the rubber's ozone aging resistance properties
| Name | Stainless Steel Ozone Aging Test Chamber,Rubber Ozone Aging Tester | |||
| Model | OC-250 | OC-500 | OC-800 | OC-010 |
| Internal dimensions (mm) | 600*600*700 | 700*800*900 | 800*1000*1000 | 1000*1000*1000 |
| Overall dimensions (mm) | 960*1150*1860 | 1180*1350*2010 | 1280*1550*2110 | 1500*1550*2110 |
| Temperature range | 0℃～100℃ | |||
| Humidity range | 30% - 98％R.H | |||
| Temperature fluctuation | ±0.5℃ | |||
| Temperature deviation | ± 2.0 ℃ | |||
| Humidity deviation | ± 2.5% RH | |||
| Cooling rate | Ambient~ 0℃ within 20 min. | |||
| Ozone concentration: | 1～1000PPHM | |||
| Sample holder rotate speed: | 0~10 r/min | |||
| Airflow rate | 0 ~ 60L/min | |||
| Clamps tensile stretch : | 5%～35% | |||
| Temperature Sensor | PTR Platinum Resistance PT100Ω/MV A-class | |||
| Humidity sensor | Dry and wet bulb sensor | |||
| Heater | Nichrome heater | |||
| Cooling system | Mechanical compression refrigeration system | |||
| Refrigerating unit | French TECUMSEH compressor | |||
| Humidifier | External isolation, stainless steel surface evaporation humidifier | |||
| Dehumidification system | Evaporator | |||
| Air circulation | Centrifugal wind fan | |||
| Exterior material | Steel Plate with protective coating | |||
| Interior material | SUS304 stainless steel | |||
| Thermal insulation | Polyurethane foam | |||
| Observation window | Interior lighting , double-layer thermo stability silicone rubber sealing | |||
| Power & voltage: | AC380V 50HZ | |||
| 1. Control Operation set temperature, humidity, ozone concentration, Clamps tensile stretch, Airflow rate, Sample holder rotate speed, the control panel can be connected to the computer, mobile APP, USB, R404A & R23, etc. easy operation and storage of data. | 2. Ozone Exhaust Device After completed ozone testing, click “Exha” button on controller to exhaust ozone from test area to this exhaust device. This absorbs ozone, to make workplace clean and safe. |
| 3. Test area and sampler holder Ozone test chamber is for testing of elastomers. Test area is made of stainless-steel. Equipped with dynamic sample holder. Static + dynamic combined sample holder, can stretch samples, sample holder can 360° rotated, meet different test standards | 4. Viewing Window Double layer insulating glass 8cm thick, made of tempered glass. The conductive film is located on the interior glass to prevent window frosting, built-in LED light for the work room lighting ;can clearly observe samples.The light control button is located below the controller |
1. Automatic control and supply ozone gas
2. Equipped with ozone generator
3. Temperature from 0℃ to 100℃
4. Relative humidity from 30%~98％R.H
5. Ozone concentration can be adjusted from 0 to 1000PPHM
6. Dynamic sample holder
▶ 3 Years Warranty, Lifelong Follow-up Services.
▶ we will supply solutions to you with 24 hours.
▶ On site service
▶ Video training service
1. packing:Wooden cases standard export package
2. Price terms: EXW, FOB,CIF Shanghai or Shenzhen.
3. Payment terms: L/C. Western Union. Paypal. T/T,
4. Sample lead time: 3-8 days
5. Mass production time: 10-15 days depending on the order qty
6. Delivery method time: By air, by sea or combined transportation,
7. Door to door service with Express: Fedex, DHL, UPS, EMS
1. Can I install and debug calibration on site?
-- Yes, we can send technicians and engineers to the customer site for installation, commissioning and calibration.
2. Can you send engineers to our company?
--Yes, sure. We will communicate in advance to facilitate the bringing of tools and components.
3. Can we come to your factory to study and train?
-- Welcome to our factory for study and training, we provide this service free of charge.
4. Do you have an agent?
-- Currently we have agents in Europe, Asia, North America, South Africa, and can provide sales and technical services.
5. Can you ship quickly?
-- Our delivery period is 3-21 days. Some of the hot-selling equipments are in stock and can be shipped within 1-3 days.
6. How long is the warranty period?
-- Warranty period is 3 years, free service for life
| Benchtop Environmental Chamber | Xenon Test Chamber |
| Salt Spray Corrosion Test Chamber | SO2 H2S CO2 Noxious Gas Test Chambers |
Send inquiry now, we will quick reply!